Krish Solar Installations Done
Happy 5-Star Customers
Field EPC Experience
Clean Energy Generated
Select an application category or browse our end-to-end solar engineering offerings below.
The Krish Solar On-Grid system connects directly to your local electricity utility grid (DISCOM) via a smart bi-directional net meter. During peak sunny hours, your rooftop exports excess units directly into the grid, turning your meter backward. At night, you effortlessly consume power from the grid, achieving up to 100% savings on monthly power bills.
Perfect for farmhouses, rural estates, schools, hospitals, and areas suffering from frequent grid blackouts. Krish Solar pairs high-efficiency solar modules with heavy-duty Lithium Iron Phosphate (LiFePO4) or C10 tubular solar batteries and intelligent MPPT solar inverters. Generate and store your own energy with absolute grid independence.
The best of both worlds. Krish Solar Hybrid installations combine on-grid net metering exports with intelligent battery storage. During sunny hours, your rooftop powers your property and charges batteries. Any surplus power is exported to DISCOM. If the grid drops, the system transfers loads in less than 10 milliseconds — your computers, smart TVs, and medical equipment won't even flicker!
Rural flour mill owners lose ₹30,000 to ₹60,000 monthly due to erratic commercial electric tariffs and expensive diesel generators. Krish Solar engineers custom high-torque Solar VFD (Variable Frequency Drive) arrays that power 10HP, 15HP, 20HP, and 30HP milling motors directly from direct sunlight without costly batteries.
Reliable, abundant water for your farm crops every single sunny day. Krish Solar supplies MNRE & PM-KUSUM compliant solar pumping systems equipped with stainless steel SS304 submersible pump sets, automated MPPT motor controllers, and anti-theft galvanized ground racking. Water your fields comfortably during regular daylight hours.
Cut expensive geyser and boiler power consumption completely. Our evacuated 3-target vacuum tube collector (ETC) and flat plate collector (FPC) solar water heaters maintain hot water temperatures up to 85°C even on cold winter mornings. Constructed with 50mm high-density PUF insulation for 48 hours of heat retention.
A transparent side-by-side comparison of solar configurations, subsidies, and ideal usage cases.
| Key Criteria / Feature | Krish Solar On-Grid (Recommended) | Krish Solar Off-Grid | Krish Solar Hybrid | Krish Solar Atta Chakki |
|---|---|---|---|---|
| DISCOM Grid Connection | Mandatory (Synchronizes with grid) | Not Required (100% Standalone) | Optional / Recommended | Not Required (Runs directly on solar) |
| Battery Storage Bank | None (Zero maintenance) | Required (LiFePO4 / Tubular) | Required (Lithium / Tubular) | None (Direct VFD Drive) |
| Power During Grid Blackout | Shuts down (Anti-islanding safety) | Yes, 24/7 continuous | Yes (< 10ms UPS switch) | Operates during daytime |
| Net Metering & Export Credit | Yes (Exports surplus to grid) | No | Yes (Exports surplus after battery full) | No |
| PM Surya Ghar DBT Subsidy | Up to ₹1,08,000 Direct Subsidy | Not applicable | Limited / Inverter dependent | Custom MSME Tax Benefits |
| Payback Period (ROI) | 2.8 to 3.5 Years | 4.5 to 5.5 Years | 3.5 to 4.5 Years | 14 to 18 Months |
| Ideal Applications | Urban homes, societies, shops & offices with stable grid | Farmhouses, remote locations, heavy blackout zones | Luxury residences, clinics, banks & critical continuous loads | Flour mills, oil expellers, spice grinding, rural agro plants |
| Action |
We never compromise on components. Every single Krish Solar installation incorporates Tier-1 certified engineering standards.
We install ALMM-approved, ultra-high-efficiency (up to 23%+) N-Type TOPCon and HJT (Heterojunction) bifacial modules that capture sunlight from both front and rear sides, providing up to 25% extra generation even during cloudy mornings and peak summer heat.
Fabricated using 80-micron zinc hot-dip galvanized steel. Rated to withstand severe storm winds up to 150 km/h with zero rooftop puncturing on RCC slab rooftops.
Dual copper-bonded chemical earthing electrodes guaranteeing earth resistance below 1 Ohm, paired with an early streamer emission (ESE) lightning arrestor to protect your entire home.
Every Krish Solar system links to your home Wi-Fi or 4G SIM. Open our mobile app to view instant wattage, historical monthly savings, CO2 offset, and automated diagnostic alerts.
We handle all application filings, load feasibility studies, safety inspections, bi-directional net meter installation, and commissioning with your local power electricity board.
Guaranteed 84.8% minimum power performance at the end of 25 years, complemented by 5-year comprehensive free on-site maintenance and panel wash visits from Krish Solar engineers.
From initial phone consultation to the final PM Surya Ghar subsidy credit in your bank account.
Our engineer performs a 3D shadow analysis and structural roof load check at your premises.
Receive a customized engineering design with exact generation figures, equipment specs & ROI projection.
Krish Solar manages the portal application, load extension, and official technical approval from DISCOM.
Precision mounting, wiring, chemical earthing, and inverter commissioning completed in 48 to 72 hours.
Inspection cleared, net meter installed, and up to ₹1,08,000 subsidy credited directly to your bank account.
Everything you need to know about Krish Solar systems, subsidies, and maintenance.
On-Grid: Connects to your local power grid through a net meter without batteries. Excess power generated is sent to the DISCOM to earn credits. It qualifies for up to ₹1,08,000 PM Surya Ghar subsidy.
Off-Grid: Completely independent with battery storage (LiFePO4 or tubular). Ideal for areas with power blackouts or remote properties.
Hybrid: Offers the best of both worlds — it exports excess power to the grid and charges batteries to provide instant <10ms backup during power outages.
Krish Solar is an empanelled solar vendor. We handle the entire application process on the National Portal for PM Surya Ghar. Once your installation and DISCOM bi-directional net meter inspection are completed, the Central Government (up to ₹78,000) and State Government (up to ₹30,000 in UP and other states) subsidies are credited directly into your Aadhaar-linked bank account via DBT within 30 days.
Because Krish Solar utilizes modern high-density 550W+ Bifacial N-Type TOPCon and HJT panels, each 1 kW requires only about 80 to 90 sq. ft. of shadow-free rooftop space. A 3kW system requires roughly 250 to 280 sq. ft., while a 5kW system requires approximately 420 to 460 sq. ft.
Yes. Our Solar VFD systems feature automatic frequency modulation. On slightly overcast days, the drive adjusts the motor RPM automatically to keep running without stalling. For heavy industrial installations, we also provide dual-mode hybrid controllers that allow seamlessly blending 20% grid or generator power with 80% solar power to maintain maximum milling throughput.
Solar panels have no moving parts and require minimal upkeep. Simply washing the glass surface with plain water once every 10 to 14 days removes dust and optimizes energy production. Krish Solar includes 5 years of complimentary periodic maintenance inspections and provides an IoT mobile app to monitor power output continuously.
Request Free Krish Solutions Quote
Avail ₹1,08,000 PM Surya Ghar Subsidy & 25-Year Performance Warranty
